Hycount ASTM Pipe

ASTM Schedule PVC pipes are highly durable, with high tensile and impact strength and are available in Schedule 40 and Schedule 80. Schedule 40 pipe has thinner walls, so it is best for applications involving relatively low water pressure. Schedule 80 pipe has thicker walls and is able to withstand higher PSI (pounds per square inch).

• Generally resistant to most acids, bases, salts, aliphatic solutions, oxidants, and halogens.

• ASTM Pipe exhibits excellent physical properties and flammability characteristics. Typical applications include: potable water systems, water and wastewater treatment, drainage, irrigation, agricultural.

• Available sizes: 3/4”, 1”

HYCOUNT ASTM Pipe
Nominal Pipe
Size (In Inch)
Rate/Meter
Schedule 40 Net Rate
1/2” 44.20
3/4” 57.10
1” 87.60
1 1/4” 115.30
1 1/2” 138.10
2” 185.10
2 1/2” 313.30
3” 392.70
4” 558.90
Nominal Pipe
Size (In Inch)
Rate/ Meter
Schedule 80
1/2” 54.20
3/4” 73.60
1” 107.90
1 1/4” 149.90
1 1/2” 183.70
2” 250.30
2 1/2” 400.20
3” 513.10
4” 776.50
Reducer TEE
Diameter Rate
3/4’’x1/2’’ 22.80
1’’x1/2’’ 30.00
1”x3/4” 32.70
1.1/4”x1” 52.00
1.1/2”x1/2” 60.00
1.1/2”x3/4” 62.00
1.1/2”x1” 64.00
1.1/2”x1.1/4” 68.40
2”x1/2” 94.00
2”x3/4” 96.00
2”x1” 98.00
2”x1.1/4” 100.00
2”x1.1/2” 104.00
ELBOW
1/2” 11.60
3/4” 16.60
1” 26.80
1.1/4’’ 41.60
1.1/2” 58.50
3/4’’x1/2’’ 22.80
1’’x1/2’’ 24.00
1”x3/4” 27.80
2’’ 107.00
TEE
1/2” 14.00
3/4” 22.60
1” 34.70
1 1/4’’ 53.50
1 1/2” 94.20
2’’ 118.00
COUPLER
Diameter Rate
1/2” 8.80
3/4” 12.80
1” 20.80
1.1/4’’ 28.70
1.1/2” 37.70
2” 54.50
MTA
1/2” 6.00
3/4” 9.20
3/4’’x1/2’’ 10.00
1” 15.90
1.1/4’’ 26.80
1.1/2” 31.70
2’’ 58.50
FTA
1/2” 7.20
3/4” 11.00
3/4’’x1/2’’ 10.60
1” 18.80
1.1/4’’ 27.00
1.1/2” 34.00
2’’ 46.00
END CAP
1/2” 5.90
3/4” 8.90
1” 14.90
1.1/4’’ 19.00
1.1/2” 24.80
2’’ 40.60
UNION
Diameter Rate
1/2” 25.80
3/4” 34.70
1” 56.50
1.1/4” 75.30
1.1/2” 132.80
2” 149.70
BUSH
3/4’’x1/2’’ 4.00
1’’x1/2’’ 9.90
1”x3/4” 6.90
1.1/4’’x1’’ 12.00
1.1/2’’x1’’ 20.80
1.1/2’’x1.1/4’’ 12.00
2’’x1’’ 34.70
2’’x1.1/2’’ 26.00
Reducer Elbow
3/4’’x1/2’’ 10.90
1’’x1/2’’ 16.90
1”x3/4” 16.90
1.1/4”x1” 33.70
1.1/2”x1/2” 24.80
1.1/2”x3/4” 30.00
1.1/2”x1” 36.70
1.1/2”x1.1/4” 33.70
2”x1” 80.30
2”x1.1/4” 58.50
2”x1.1/2” 58.50
CROSS TEE
Diameter Rate
1/2” 24.00
3/4” 32.00
1” 51.00
END PLUG
1/2” 6.90
BRASS ELBOW
1/2” 70.00
3/4” 116.00
1” 240.00
1.1/4’’ 420.00
BRASS RED. ELBOW
3/4’’x1/2’’ 80.00
1’’x1/2’’ 109.00
1’’x3/4’’ 163.50
BRASS TEE
1/2” 99.10
3/4” 147.70
1” 352.90
1.1/4’’ 390.00
UNION
Diameter Rate
1/2” 25.80
3/4” 34.70
1” 56.50
1.1/4” 75.30
1.1/2” 132.80
2” 149.70
BUSH
3/4’’x1/2’’ 4.00
1’’x1/2’’ 9.90
1”x3/4” 6.90
1.1/4’’x1’’ 12.00
1.1/2’’x1’’ 20.80
1.1/2’’x1.1/4’’ 12.00
2’’x1’’ 34.70
2’’x1.1/2’’ 26.00
Reducer Elbow
3/4’’x1/2’’ 10.90
1’’x1/2’’ 16.90
1”x3/4” 16.90
1.1/4”x1” 33.70
1.1/2”x1/2” 24.80
1.1/2”x3/4” 30.00
1.1/2”x1” 36.70
1.1/2”x1.1/4” 33.70
2”x1” 80.30
2”x1.1/4” 58.50
2”x1.1/2” 58.50
CROSS TEE
Diameter Rate
1/2” 24.00
3/4” 32.00
1” 51.00
END PLUG
1/2” 6.90
BRASS ELBOW
1/2” 70.00
3/4” 116.00
1” 240.00
1.1/4’’ 420.00
BRASS RED. ELBOW
3/4’’x1/2’’ 80.00
1’’x1/2’’ 109.00
1’’x3/4’’ 163.50
BRASS TEE
1/2” 99.10
3/4” 147.70
1” 352.90
1.1/4’’ 390.00
BRASS RED. TEE
Diameter Rate
3/4’’x1/2’’ 107.00
1’’x1/2’’ 147.70
1”x3/4” 173.50
BRASS FTA
1/2” 70.00
3/4” 106.10
1” 197.20
1.1/4’’ 286.50
1.1/2” 326.10
2” 547.10
BRASS RED. FTA
3/4’’x1/2’’ 75.30
1’’x1/2’’ 90.20
BRASS MTA
1/2” 102.00
3/4” 147.70
1” 231.90
1.1/4’’ 420.30
1.1/2” 511.50
2” 714.70
BRASS RED. MTA
3/4’’x1/2’’ 103.10
1’’x1/2’’ 124.90
Lets chat !